The Best Dash Cam Clip

0
755 reviews analysed

1. eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Cable Holder Clamps Cable Tie Holder for Car, Office and Home

eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Cable Holder Clamps Cable Tie Holder for Car, Office and Home

Feature

2. Dash Cam Mirror Mount – Fits Falcon F170HD,Rexing V1, Z-Edge, Old Shark, YI, Amebay,KDLINKS X1,VANTRUE and Most Other Dash Cameras

Dash Cam Mirror Mount - Fits Falcon F170HD,Rexing V1, Z-Edge, Old Shark, YI, Amebay,KDLINKS X1,VANTRUE and Most Other Dash Cameras

Feature

Description

AmorTek,Delight Your Ride

Patent Snake Mount for Dash Cam/GPS

9.7mm Ultra-slim body with 5 different joints, suitable for most rear view mirror and most dash cam. Real 360 degree rotation, available to adjust to any angle you want. Environmental silicone rubber pad, anti-slip and anti-shake. Never fall off the windshield like the suction cup holder

3. Smilife Black Cable Clips, Adhesive Wire Holder Clips for Car, Home and Office, 30 Pack

Smilife Black Cable Clips, Adhesive Wire Holder Clips for Car, Home and Office, 30 Pack

Feature

Description

Size:30 Pack

STILL SUFFERING FROM the MESSY CABLES? – MEET SMILIFE CABLE CLIP ASAP!

Awesome for Cable Clip Management: Sticky wire holders,hold cables securely, suitable for car, house and office to route various cables, can be great computer cable clips, TV cable clip holders, Christmas lights outdoor adhesive wire holders, USB wire holders, car indoor wire holders.
Wire Holders that Keep Cables Clean: No more chaotic wires or wires slip with this adhesive wire holders, prevent cables from falling to the floor becoming messy and a tripping hazard, provide a tidy environment and feel at ease.
Amazing Adhesive Wire Holders: Snap design with a spring-wire, lock the cable easily and fix it tightly, lightweight with small size, convenient and ideal nail wire holder for handling cables in the areas that the cables may be tugged on.
Apply in An Appropriate Way: In order to lengthen the wire holder’s life service, proper steps must be followed. Wipe the surface with alcohol first, then press the 4 corners of the sticky pad for a few seconds with force. We may suggest leave these it alone about 24 hours before fixing the cables to ensure the cable clips be stronger and more durable.

WARM TIPS:
▶Double check the diameter of your wires to ensure it will fit with this nail wire holder.
▶Do not hang wire that is too heavy or the wire holder may fall down easily
▶Do not remove the adhesive cable clips repeatedly once pasted
▶Do not expose these stick on cable clips in hot surrounding for a long time and keep away from water as the temperature and humidity may affect its adhesion
▶Wash it off with some water gently if there leaves sticky residue behind when taking the wire holders off

Product Details:
Material: Plastic
Length: 0.75 inch
Width: 0.57 inch
Color: Black
Quantity: 30 Pieces adhesive wire holders

4. 50pcs Adhesive Cable Clips, Wire Clips,Car Cable Organizer,Cable Holder,Cable Wire Management,Wire Cable Holder for Car,Office and Home

50pcs Adhesive Cable Clips, Wire Clips,Car Cable Organizer,Cable Holder,Cable Wire Management,Wire Cable Holder for Car,Office and Home

Feature

5. Anumit Dash Cam Mount, Universal Car Rear View Mirror Mount Holder with 16 Types, Fits Rexing, APEMAN, Aukey, YI, Vantrue, Anker Roav and Most Other Dash Cameras/GPS

Anumit Dash Cam Mount, Universal Car Rear View Mirror Mount Holder with 16 Types, Fits Rexing, APEMAN, Aukey, YI, Vantrue, Anker Roav and Most Other Dash Cameras/GPS

Feature

6. 50pcs Adhesive Cable Clips, Wire Clips,Car Cable Organizer,Cable Holder,Cable Wire Management,Cable Holder for Car,Office and Home(Included S Size M Size and L Size Cable Clips)

50pcs Adhesive Cable Clips, Wire Clips,Car Cable Organizer,Cable Holder,Cable Wire Management,Cable Holder for Car,Office and Home(Included S Size M Size and L Size Cable Clips)

Feature

7. Dash Cam Suction Cup Mount – for AUKEY, Crosstour, TOGUARD, APEMAN, YI 2.7", Z-Edge Z3 3" and Most Other Dash Cam. with 16 Different Points, 3 x 3M Double Sided Adhesive Tapes, 3 Wipes(Dry and Wet)

Dash Cam Suction Cup Mount - for AUKEY, Crosstour, TOGUARD, APEMAN, YI 2.7", Z-Edge Z3 3" and Most Other Dash Cam. with 16 Different Points, 3 x 3M Double Sided Adhesive Tapes, 3 Wipes(Dry and Wet)

Feature

Description

GENERAL NOTES:
Apply the 3M Double-Sided Adhesive Mount Holder Bracket, it is recommended to stick it to the windshield first. It will be stronger when you install the dash cam after 6 hours.

Applicable models:
AUKEY, Rexing v1, YI 2.7″, Crosstour, APEMAN, Roav, Old Shark, E-ACE, TaoTronics, WheelWitness, JEEMAK dash cam and more… (Including but not limited to)

8. APEMAN Dash Cam Mirror Mount Kit, Car Rear View Mirror Mount Holder with 360 Degree Free Rotation, Fits APEMAN Dash Cam and Most Car Recorder, More Stable and Anti-Shake

APEMAN Dash Cam Mirror Mount Kit, Car Rear View Mirror Mount Holder with 360 Degree Free Rotation, Fits APEMAN Dash Cam and Most Car Recorder, More Stable and Anti-Shake

Feature

Description

APEMAN Dash Cam Mirror Mount Kit is suitable for most APEMAN Dash Cams and other car cameras. It will be more stable than suction cup.

Features:
Applicable models:Come with 4 different joints, suitable for most APEMAN dash cams and other cameras on the market.
Ultra-slim: 9.70mm design to suit most car rear view mirror.
Ball Diameter: 15mm
Clamping diameter range: 38mm-65mm
360 degree rotation design, rotate ball adapter head provides flexibility for positioning the dash cam.

Installation Instruction:
1.Loosening the screw with butterfly nut.
2.Mounting the slicone rubber pad and clip onto the car rearview mirror.
3.Adjust the clip to fit the best angle.
5.Tightened the clip on the rearview mirror with butterfly nuts.
6.Connect the proper connector to the clamp then mount to the clip on the rearview mirror.
The installation details are showed in product manual, please kindly check.

Package Content:
1 Rearview Mirror Dashcam Mount assemble kit
4 Types of Joints Adapter
4 Long Screw
1 Belt

Warm Tips:
If you don’t have experience on installing the mirror mount kit for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.

9. Dual Dash Cam, VAVA 2K Front and 1080P Cabin or 2.5K 30fps Single Front Car Camera, Both Sony Sensor, Infrared Night Vision, App Control & 2" LCD Display, Parking Mode, Built-in GPS for Uber & Lyft

Dual Dash Cam, VAVA 2K Front and 1080P Cabin or 2.5K 30fps Single Front Car Camera, Both Sony Sensor, Infrared Night Vision, App Control & 2" LCD Display, Parking Mode, Built-in GPS for Uber & Lyft

Feature

Description

Technical Specifications:
CPU: Amba H22A55
Video Resolution: Front Camera 2560*1600P @30fps; Rear Camera 1920*1080P @30fps

Sony Sensor: Front Camera IMX335; Rear Camera IMX307

GPS: Build-in
G-Sensor: 3-Axis Accelerometer
Built-in Battery Capacity: 320mAh
Screen: 2 inch LCD
USB: USB2.0
Power Input: 5V-1.5A
Built-in Wi-Fi: 2.4GHz 802.11b/g/n
Video Clip / Photo Format: MP4 / JPG
Loop Recording: 1 /3 /5 Minutes Clips
Fatigue Reminder: Supported
Voice Record:Supported
TF Card: Micro SD Card U3, 16GB-256GB (Make sure use U3 SD card, Recommend Samsung or Sandisk 64 to 256G U3 card )
Operating Temperature: -20°C~50°C / -4°F~122°F
Language: English/ French / German / Spanish / Italian / Japanese

What’s in the Box:
1 x VAVA Dash Cam(Model: VA-VD009)
1 x Car Charger
1 x Car Mount
1 x Snapshot Button1 x Charging Cable with GPS Module
5 x Cable Clips
1 x Crowbar
1 x User Guide

(Make sure use U3 SD card, Recommend Samsung or Sandisk 64 to 256G)

Conclusion

By our suggestions above, we hope that you can found Dash Cam Clip for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general